অক্টো. . 13, 2025 17:51 ফিরে তালিকায়

Gas fired hot water boiler for sale: efficient, in stock?

Looking for a dependable gas hot-water workhorse? Read this first.

If you’re scanning the market for a gas fired hot water boiler for sale, here’s the inside track from the plant room floor. The headline story in 2025 isn’t just efficiency—it’s ultra-low NOx, lifecycle cost, and how quickly you can get heat online without drama. Actually, many customers say reliability now beats raw peak efficiency, but you still want both.

Product snapshot: Gas (oil) hot water boiler

Built in No.2 Suheng North Street, Raoyang County, Hengshui City, this line covers campus heating, hotels, hospitals, and light-process heat. Specs in brief below—real-world numbers will depend on your loop temperatures, return water, and whether you add a condenser. To be honest, that last piece is where gains get interesting.

Rated Thermal Power	0.7–140 MW	Working Pressure	0.7–1.25 MPa
Fuels	Natural gas, LPG, biogas, coke oven gas	NOx Emission	≤ 30 mg/Nm³ (≈10% O₂)
Thermal Efficiency	≈ 92–98% (with condenser; return temp dependent)	Control	PLC with modulating burner, remote I/O optional
Construction	Three-pass wet-back; Q245R shell steel	Service Life	≈ 15–20 years with proper water treatment

Process, testing, and standards (what matters long-term)

Materials: pressure parts in Q245R; tubes SA-210/SA-106 equivalents depending on duty.
Welding: submerged arc + GTAW on roots; 100% RT/UT on seams per GB/T 16508.
Hydrostatic test: 1.5× design pressure; tightness test on all flanged joints.
Combustion tuning: staged/lean premix burners to hit ≤30 mg NOx per GB 13271.
Quality: ISO 9001 system; CE marking available on export models.
Water-side: follow GB/T 1576; hardness and alkalinity control extend life significantly.

Typical FAT notes from recent units: NOx 27 mg/Nm³, stack temp 75–85°C with condenser, and stable 30–100% turndown (burner dependent). I guess in the field you might see a hair higher due to draught conditions.

Where it fits

District heating loops, university campuses, hospitals (sterilization + space heat), hotels, food & beverage CIP preheat, greenhouses, and retrofit projects swapping older oil units. Many maintenance teams told me they value the quiet operation more than they expected.

Customization highlights

Low-NOx burners, condensing economizers, oxygen trim, cascade controls, skid-mounted packages, and BMS integration (Modbus/Profibus). Lead-lag setups are common for seasonal swings.

Comparison	HZ Boiler (Raoyang)	Vendor A	Vendor B
NOx (real-world)	≤30 mg/Nm³ routinely	30–60 mg/Nm³	≈30 mg/Nm³ with options
Thermal Power Range	0.7–140 MW	1–58 MW	0.7–100 MW
Lead Time (indicative)	Around 30–60 days	60–90 days	45–75 days
Customization depth	High (controls, skid, fuels)	Medium	Medium–High

Field notes and quick case studies

Hospital retrofit, 8 MW x 2: cut NOx from 120 to ≈28 mg/Nm³; gas use down ≈12% after condenser and O₂ trim. Payback ≈2.3 years.
Campus district loop, 35 MW: two-stage firing upgraded to full modulating; fewer short cycles, quieter plant room, winter peak delivered with 8% headroom.

If you need a gas fired hot water boiler for sale for biogas co-firing, ask about burner mixing trains and CV variability. And if seasonal turndown is huge, specify min-fire stability upfront—saves headaches later. For public tenders, the ≤30 mg/Nm³ NOx box is increasingly a must-have.

Bottom line: a gas fired hot water boiler for sale that’s engineered to GB/ASME norms, tuned for ULN, and paired with proper water treatment will run for decades—quietly earning its keep.