10월 . 09, 2025 16:24 다시 목록으로

Types of Coal Fired Steam Boiler: Which Is Most Efficient?

Coal‑fired Steam Boiler Types: Field Notes from the Boiler Room

If you’ve ever tried to compare types of coal fired steam boiler across vendors, you know it’s not just about capacity numbers on a brochure. It’s grate geometry, coal class, ash behavior, emission controls—and, frankly, whether the service team actually picks up the phone at 2 a.m. when a chain slips. Here’s what the market really looks like in 2025, warts and all.

Main configurations (and where each one shines)

Chain grate (workhorse): Good for bituminous and anthracite blends; steady steam loads; automatic stoker, decent turndown.
Reciprocating grate (for “difficult” fuels): Handles high-ash lignite or coal gangue better; robust fuel agitation, fewer clinkers.
Hand‑fired (low capex, high touch): Small plants or backup duty; operators love the simplicity, but labor-intensive.

In fact, many customers say the grate decision dictates 80% of their operating experience. And yes, fuel prep—sizing and moisture—still makes or breaks real efficiency.

Product snapshot and specs (HZ Coal‑fired Steam Boiler)

Parameter	Spec (≈, real‑world may vary)
Rated steam capacity	0.5–200 t/h
Working pressure	0.7–2.5 MPa
Grate options	Chain, reciprocating, hand‑fired
Fuels	Lignite, bituminous, anthracite, gangue
Boiler efficiency	80–86% with economizer; up to ≈88% with air preheater
Typical emissions (with controls)	PM ≤ 30 mg/Nm³; SO2 ≤ 200 mg/Nm³; NOx ≤ 200 mg/Nm³

Process flow, materials, and testing

Materials: boiler drum in SA‑516/GB Q345R; seamless tubes; refractory-lined furnace. Methods: CNC plasma cutting, submerged‑arc welding, NDT (RT/UT) on pressure parts, hydrostatic test ≥1.5× design pressure. Standards: ASME BPVC/ISO 16528/EN 12952/GB/T 16507. Factory QA runs performance tests (steam output, efficiency) and flue‑gas analyzers for PM/NOx/SO2. Service life: ≈20 years with proper water chemistry (per GB/T 1576) and scheduled sootblowing.

Applications and real‑world notes

Textiles, paper, food & beverage (clean, steady steam).
Chemicals, building materials, small district heating.
Mining regions using coal gangue—reciprocating grates reduce slagging.

Customer feedback: “Chain grate + bituminous blend held 8 bar like a rock; baghouse needed extra attention during monsoon.” That tracks with what we’ve seen.

Vendor comparison (what buyers actually weigh)

Vendor	Capacity Range	Certifications	After‑sales	Notes
HZ Boiler (Origin: No.2 Suheng North Street, Raoyang, Hengshui)	0.5–200 t/h	ISO 9001, CE; built to ASME/GB	24/7 remote + field within 48h	Strong on reciprocating grates and gangue fuels
Vendor A	1–100 t/h	ASME S/U	Regional service hubs	Efficient chain grates; limited lignite support
Vendor B	2–150 t/h	EN 12952/ISO	Email + scheduled visits	Great economizers; slower parts logistics

Customization and add‑ons

Fuel tailoring: lignite dryers, coal blending, slag‑resistant grates.
Emission packages: multi‑cyclone + baghouse, semi‑dry FGD, low‑NOx air staging.
Controls: O2 trim, VFD draft fans, steam flow metering (ISO 5167 or ASME MFC‑3M).

Case note

Shanxi brick plant swapped an older hand‑fired unit for a 10 t/h reciprocating grate. Results after 90 days: fuel use down ≈9.5%, PM cut from ~80 to 25 mg/Nm³ with a new baghouse, steam stability improved (±0.1 MPa). Not glamorous, but it paid back in under two years.

If you’re comparing types of coal fired steam boiler for a mixed‑fuel site, weigh fuel variability first, then emissions, then service reach. To be honest, cheap steel is easy—reliable combustion is the hard part.