정격 화력: 0.7-140MW

Working pressure: 0.7-2.5 MP

Available Fuel: Lignite, bituminous coal, anthracite, gangue.

The working principle of coal-fired hot water boiler is that coal is decomposed and burned in the furnace chamber, releasing a large amount of heat energy, which is transferred to the water in the boiler barrel and water-cooled wall through the flue pipe and flue, so that the water in the boiler is heated, and ultimately produces circulating hot water for heating.

정격 화력: 0.7-140MW

Working Pressure: 0.7-1.25MP NOx

Emission ≤ 30mg

Available Fuel : Natural gas, Lpg biogas coke oven gas

정격 화력: 0.7-140MW

작동 압력: 0.7-2.5MP

사용 가능한 연료: 바이오매스 연탄, 바이오매스 펠렛, 우드 칩, 왕겨, 옥수수 속대, 톱밥

소개

바이오매스 증기 보일러의 작동 원리는 석탄이 노실에서 분해 및 연소되어 많은 양의 열에너지를 방출하고, 이 열에너지가 굴뚝 및 굴뚝을 통해 보일러 배럴 및 수냉식 벽의 물로 전달된다는 것입니다. , 보일러의 물을 가열하고 궁극적으로 난방용 순환 온수를 생성합니다.

Thermal Power: 30-1400 (10⁴Kcal/h)

Working pressure: 0.8-1.0 MPa

Outlet temperature: 320 °C

Available Fuel: Lignite, bituminous coal, anthracite, gangue

Biomass fired thermal Oil Boiler is fueled by Biomass, heat is provided by natural gas burner, and heat transfer oil is the heat carrier. The circulating pump is used to force the thermal oil to circulate in the liquid phase and transfer the heat to one or more heat-using equipments Rated

Thermal Power: 30-1400 (10⁴Kcal/h)

Working pressure: 0.8-1.0 MPa

Outlet temperature: 320 °C NOx Emission ≤ 30mg

Available Fuel: Natural gas, Lpg biogas coke oven gas
Gas fired thermal Oil Boiler is fueled by natural gas, heat is provided by natural gas burner, and heat transfer oil is the heat carrier. The circulating pump is used to force the thermal oil to circulate in the liquid phase and transfer the heat to one or more heat-using equipments Rated

Thermal Power: 30-1400 (10⁴Kcal/h)

Working pressure: 0.8-1.0 MPa

Outlet temperature: 320 °C

Available Fuel: Lignite, bituminous coal, anthracite, gangue
Gas fired thermal Oil Boiler is fueled by natural gas, heat is provided by natural gas burner, and heat transfer oil is the heat carrier. The circulating pump is used to force the thermal oil to circulate in the liquid phase and transfer the heat to one or more heat-using equipments Rated.